Spoleto Ribbon Skirt Sew-a-Long Part 1

08 Jul Spoleto Ribbon Skirt Sew-a-Long Part 1

Greetings!

At last the time has come to make the Spoleto Ribbon Skirt   provided by Julie Starr and inspired by the J McLaughlin ribbon skirt.

      

Many have asked how to sign up and the answer is you simply follow along on my blog.

________________________________

If you are just now joining in,  you will need the following materials.

1. Your favorite straight skirt pattern

2. 1 yard good quality prewashed cotton fabric for your skirt base (Julie recommends Kona cotton)

3. Fusible interfacing for the skirt facings

4. 1 9” invisible zipper in a color to coordinate with your ribbon

5. 1 hook and eye

6. 1 package double fold seam binding for seam finishing, if desired

7. 1 ½” wide grosgrain ribbon.

Julie’s skirt which is a finished length of 19” has 14 rows, not including the waistband. Add rows accordingly for additional length. The ribbon quantities for Julie’s pattern size 10, graded to 12 at the hip are:

8. 2 ½ yards dk aqua (bottom 2 rows)

9. 5 yards light aqua (rows 3-6)

10. 5 yards seafoam (rows 7-10)

11. 5 yards light blue (rows 11-14)

12. 1 yard 3” wide grosgrain ribbon for the top layer (waistband)

13. Thread in colors to match your ribbon. Note – since the seam for each layer is hidden by the layer above, it’s not imperative to match each ribbon color exactly.  The waistband ribbon is the only row which you should match closely since it is topstitched.

________________________________

So let’s get started!

 Cutting your skirt base

• VERY IMPORTANT!! Be sure to cut your skirt out a size larger than you normally wear.  Attaching the ribbon will create an ease stitching effect and the result will be a slightly smaller size than you started with.
• The zipper will be inserted in the left side seam leaving the ribbon uninterrupted in back, so if your pattern is one with a center back zipper, cut the skirt back on the fold and omit the back zipper..

1.  Mark the front and back darts and sew as directed.  Mark the zipper placement with a dot in the left side seam as your pattern directs.

2.  Hem the bottom edge of the front and back sections to your desired length with a simple double fold and machine stitching.  This will be hidden by your bottom row of ribbon so there’s no need to finish by hand.

Ribbon Attachment

3.  Now begin “shingling” your ribbon rows. Press each ribbon row just prior to pinning itand again after sewing it down and removing the pins so that it lies perfectly flat.

4.  Attach the bottom row by marking ¾” from the hemmed edge of your skirt.  Use a tiny dot of disappearing marker every 4 inches across and connect the dots using a ruler.

5.  Now carefully pin your ribbon along this line so that the lower edge of your ribbon extends ¾” below the finished edge of your skirt base. Leave an overhang of about ½” at each side seam.  Don’t worry about trimming the overhang now; you’ll do it all in one step after all rows are attached. The success of your side seam matching later on will depend on careful measuring, marking and pressing.

6.  Sewing as close to the upper edge of the ribbon as possible, attach the first row of ribbon using a 2.5 stitch length.

7.  Lay skirt face up and mark another row of connected dots 1 1/4” from the top edge of the ribbon row you just attached. Pin and sew your second row of ribbon exactly on this line.This row will now overlap the first row by 1/4”, hiding the seam.

8.  Continue marking and pinning in a similar manner, changing ribbon colors as desired, to within 2 inches (measured at the side seam) of the waist.

9. Since the waistline of McCalls 3830 is slightly curved, a wider ribbon is required for the top layer.  Pin the 3” waistline ribbon to the skirt base, overlapping the ribbon row beneath it by 1/4”. Sew this edge down to prevent rolling and seam exposure. Trim the top edge of the waistline ribbon to match your skirt base’s upper edge and baste. Press.

10.  Lay your skirt panel with all ribbon rows attached face down and trim the excess ribbon at the sides, following the outline of your skirt base. Pin and baste each side edge so that all rows are now secured to the base. Tip – start at the top and sew down so that all rows remain  flat.

11.  Complete skirt back in the same manner.

________________________________

That’s it for this week. After everyone has had a chance to attach the ribbon to both front and back pieces, Julie will show us how to assemble the skirt.

In the meantime please reply with your questions or comments which Julie or I will address.

Have fun!

🙂